Introducing
the world's first

Complex fluid with wet drying capabilities

Pro-Ferrum is designed to spread over surfaces in a similar manner to a super fluid: once applied on a surface it forms a thin oil film which continues to creep over the surface to which it’s applied.

Find Out More

How pro-ferrum works

Pro-Ferrum is not a classical oil, but a so called complex fluid. Complex fluids are based on a variety of active ingredients which form a molecular team work. This team is outstandingly strong in cleaning, encapsulation of water, metal protection and lubrication.

Due to the high spreading properties Pro-Ferrum undergoes and cracks baked or burned-in residues. The protection team neutralises acids from fingerprints, dissolves the very first beginning of rust and replaces it by anti-corrosion layers.

See Pro-Ferrum in action

Protects Guns & Prevents rust

Pro-Ferrum is not a traditional oil, it is a complex fluid. Complex fluids are based on a variety of active ingredients which form a complex molecular compound. This compound is outstandingly efficient in dissolving powder residue, encapsulating water, protecting and lubricating metal.

Spreading
Pro-Ferrum is designed to spread out over surfaces and create a fine film similar to a super fluid: it forms a thin film and continues to creep over any surface and penetrate even the finest gaps. This is a significant difference to ordinary gun oils, which have limited penetrating properties requiring careful application to ensure all surfaces are covered.
Water-encapsulation
When sprayed on a wet surface, like on a barrel in the rain, Pro-Ferrum, breaks down the water into tiny droplets and encapsulates them and a yellowish emulsion occurs. A second spray of Pro-Ferrum replaces this emulsion with an oil film, which protects the metal from any further attacks of oxidation.
Cleaning
Pro-Ferrum has excellent cleaning properties. It penetrates and lifts undesired residues and protects the material underneath.
Pro-Ferrum dissolves rust quickly and as an indication, the colour of the fluid changes to orange.
Brass, Tombac and Lead: bullets leave a layer of residue in the barrel. Pro-Ferrum dissolves these metallic residues each time it is applied after shooting. As an indication, the colour of oil becomes green or grey.
Old Oil and Grease residue: Pro-Ferrum dissolves old oil and grease residue easily.
Protection
Iron and Steel four stage effectiveness:
The first stage of effective metal protection is to clean the areas vulnerable to early corrosion. Blued finishes are especially prone at converting sweat, fingerprints or humidity into rust.
The second stage is to build up an active neutralising layer. Sweat and acids from powder residues are neutralised by Pro-Ferrum.
The third stage is to block the rust-active spots by neutralising their electrochemical potential and by capturing free ions. Pro-Ferrum covers these spots with hydrophobic, water-repellent working agents. The protection is intensified every time Pro-Ferrum is applied.
The forth stage is the protection of the metal with a thin layer of oil, in order to prevent water and acids coming into contact with the metal surface.
Copper, Brass and Bronze: Protecting these is not quite as important as with ferrous metals, however, avoiding them is key to maintaining the aesthetic of the metal. Pro-Ferrum contains special anti-corrosion properties for these metals.
Leather: Being skin friendly, Pro-Ferrum does not damage leather like some traditional oils, in fact, it softens even brittle leather and recovers its flexibility.
Wood: Pro-Ferrum can be used in small quantities for wooden stocks. With a few drops onto a soft cloth, then applied to the stock, you will be rewarded with a refreshed, shiny appearance.
Plastics: Plastics and polymers used for firearms are usually robust materials, but some plastics tend to degrade when exposed to UV-light. Pro-Ferrum can reduce this ageing by providing a protective barrier and antioxidants.
Lubrication
Pro-Ferrum lubricates all parts of a gun by forming a thin oil layer. This layer is sufficient for smooth operation but it will not bind grit or sand to form an abrasive compound.

Pro-Ferrum is designed to spread out over surfaces and create a fine film similar to a super fluid: it forms a thin film and continues to creep over any surface and penetrate even the finest gaps. This is a significant difference to ordinary gun oils, which have limited penetrating properties requiring careful application to ensure all surfaces are covered.

When sprayed on a wet surface, like on a barrel in the rain, Pro-Ferrum, breaks down the water into tiny droplets and encapsulates them and a yellowish emulsion occurs. A second spray of Pro-Ferrum replaces this emulsion with an oil film, which protects the metal from any further attacks of oxidation.

Pro-Ferrum has excellent cleaning properties. It penetrates and lifts undesired residues and protects the material underneath.

Pro-Ferrum dissolves rust quickly and as an indication, the colour of the fluid changes to orange.

Brass, Tombac and Lead: bullets leave a layer of residue in the barrel. Pro-Ferrum dissolves these metallic residues each time it is applied after shooting. As an indication, the colour of oil becomes green or grey.
Old Oil and Grease residue: Pro-Ferrum dissolves old oil and grease residue easily.

Iron and Steel four stage effectiveness:

The first stage of effective metal protection is to clean the areas vulnerable to early corrosion. Blued finishes are especially prone at converting sweat, fingerprints or humidity into rust.
The second stage is to build up an active neutralising layer. Sweat and acids from powder residues are neutralised by Pro-Ferrum.
The third stage is to block the rust-active spots by neutralising their electrochemical potential and by capturing free ions. Pro-Ferrum covers these spots with hydrophobic, water-repellent working agents. The protection is intensified every time Pro-Ferrum is applied.
The forth stage is the protection of the metal with a thin layer of oil, in order to prevent water and acids coming into contact with the metal surface.

Copper, Brass and Bronze: Protecting these is not quite as important as with ferrous metals, however, avoiding them is key to maintaining the aesthetic of the metal. Pro-Ferrum contains special anti-corrosion properties for these metals.

Leather: Being skin friendly, Pro-Ferrum does not damage leather like some traditional oils, in fact, it softens even brittle leather and recovers its flexibility.

Wood: Pro-Ferrum can be used in small quantities for wooden stocks. With a few drops onto a soft cloth, then applied to the stock, you will be rewarded with a refreshed, shiny appearance.

Plastics: Plastics and polymers used for firearms are usually robust materials, but some plastics tend to degrade when exposed to UV-light. Pro-Ferrum can reduce this ageing by providing a protective barrier and antioxidants.

Pro-Ferrum lubricates all parts of a gun by forming a thin oil layer. This layer is sufficient for smooth operation but it will not bind grit or sand to form an abrasive compound.

Online Brochure Technical Specification

Effective Metal Protection

UK DISTRIBUTOR

John Rothery Wholesale

John Rothery, Rothery House, Waterberry Dr, Waterlooville PO7 7XX
Telephone: 023 9224 5350

DANISH DISTRIBUTOR

Morehouse A/S

Boegekildevej 34, DK-8361 Hasselager
Telephone: +45 8742 1001

Stockists

Barbury Shooting School

Wroughton, Swindon SN4 0QH
01793 940420

Complex fluid with wet drying capabilities

How pro-ferrum works

See Pro-Ferrum in action

Protects Guns & Prevents rust

Spreading

Water-encapsulation

Cleaning

Protection

Lubrication

Effective Metal Protection

UK DISTRIBUTOR

DANISH DISTRIBUTOR

Stockists

Contact